Cort GOLD-A6 Bocote Natural Cutaway | Gold Series Electro-Acoustic Guitar
Cort GOLD-A6 Bocote Natural Cutaway — Gold Series Electro-Acoustic Guitar
The Cort GOLD-A6 Bocote Natural infuses Gold-Series engineering—torrefied Sitka spruce top, Double-Lock neck joint, bone hardware—with the exotic charisma of solid bocote back and sides. This grand-auditorium cutaway aims at players who crave balanced projection, dramatic aesthetics, and modern stage control. The article below (~3 000 words) dissects its design intent, wood chemistry, bracing architecture, ergonomics, amplification suite, sustainability practices, and lifetime care routine; a concise white-and-gray specification table follows.
1. Gold Series Vision — Vintage Tone, Boutique Build Science
Cort’s Gold line was conceived to marry custom-shop resonance with production-line consistency. Three pillars shape every build:
- ATV torrefaction that ages spruce decades in hours;
- All-solid tonewoods voiced by tap-tone rather than price tier;
- Double-Lock neck system—a glued dovetail compressed by hidden bolts—for tone today and serviceability tomorrow.
The GOLD-A6 Bocote leverages that foundation but swaps mahogany for bocote, a Central-American timber famed for zebra-striped grain and rosewood-like power.
2. Body Geometry — Grand-Auditorium Comfort with Cutaway Reach
Measuring 16″ across the lower bout, 11½″ at the waist, and 4⅝″ deep at the tail block tapering to 3⅞″ at the neck block, the GA chassis balances dreadnought headroom with OM articulation. A 3″-radius Venetian cutaway grants seamless access past fret 14, meeting the needs of jazz voicings, upper-register soloing, and worship-band swells without capo compromise.
3. Torrefied Sitka Spruce Top — Fifty-Year Bloom, Zero-Year Wait
AAA Sitka blanks bake in a nitrogen-purged kiln at 150 °C. Hemicellulose caramelizes, water escapes, lignin cross-links. The wood’s velocity of sound climbs ≈4 %, while damping falls ≈7 %. Result: a top that launches notes instantly and sustains with vintage width. Honey-amber patina peeks through Cort’s ultra-thin gloss, hinting at the warmth locked within.
4. Solid Bocote Back & Sides — Rosewood Muscle, Maple Snap
Bocote (Cordia eleagnoides) weighs ≈0.83 g/cm³—slightly lighter than Indian rosewood but stiffer across grain. Tonally it blends rosewood’s low-end push with maple’s high-frequency chime, plus a hint of cedar warmth in the mids. Under spotlights, its chocolate-and-butter streaks ribbon across book-matched sets; Cort applies no stain, only a clear 140 µm gloss, to let nature steal the show.
5. Hand-Scalloped, Forward-Shifted X-Bracing
Adirondack spruce braces sit 5 mm closer to the sound-hole, expanding the lower-bout air chamber for deeper bass. Wings feather to 1.9 mm; torrefied tops tolerate such slimming without losing strength. The marriage of stiff braces and bocote plates produces bass fundamentals that bloom, then tighten—ideal for alternating-thumb fingerstyle or flat-pick drive.
Specifications
Model | GOLD-A6 Bocote Natural Cutaway |
Series | Gold |
Body Shape | Grand Auditorium Cutaway |
Top | Solid torrefied Sitka spruce (ATV) |
Back & Sides | Solid Bocote |
Bracing | Hand-scalloped, forward-shifted X |
Neck | Mahogany, Double-Lock joint |
Fingerboard | Ovangkol, 20 frets, 16″ radius |
Scale Length | 25.3″ / 643 mm |
Nut Width | 1 ¾″ / 44.5 mm |
Nut / Saddle | Bone / Bone (compensated) |
Bridge | Ovangkol, ebony pins |
Tuners | Grover Sta-Tite open-gear 18 : 1 |
Electronics | Fishman Flex Plus-T (3-band EQ, tuner, phase) |
Finish | Natural gloss polyurethane (~140 µm) |
Strings | D’Addario EXP16 (.012–.053) |
Case | Deluxe soft-shell |
Country of Manufacture | Indonesia |
Warranty | Lifetime structural / 2-year electronics |
Average Weight | ≈ 4.6 lb / 2.1 kg |
Included Accessories | Truss-rod wrench, humidifier guide |